Comment by rittermax

Comment by rittermax

The DIY-Thermocam V3 is a low-cost, do-it-yourself thermal imager, based on the popular radiometric FLIR Lepton sensor and an open-source ecosystem.

It gives private persons, educational institutes and companies access to a portable, affordable and customizable thermal imaging platform that is based on open-source software and hardware. It is constructed as a self-assembly solution, that can be build at home by only using some standard tools.

There are various applications like finding heat leaks in the insulation of buildings, the analysis of electrical or mechanical components, the detection of persons / animals or even mounting it on a drone and recording continuous or time-lapse images.

The device has a large ecosystem of software around it, that allows to extend the functionalities of the device beyond the firmware itself. You can use the Thermal Analysis Software to edit raw data files on your PC and save them in various file formats. In addition to that, the Thermal Live Viewer can stream live thermal images to your PC, change settings on the fly and record images or videos. The Thermal Data Viewer provides another way of editing raw files, and with the Video Converter you can convert series of captures images to movie files.

The Device Firmware provides a lot of functionalities, that can be accessed over the 3.2" TFT LCD touch screen. Flashing the firmware is easy and can be done without any programming knowledge on any operating system over the command line interface. Once the Thermocam is connected to the PC, it will show up as a mass storage device and allows you to transfer thermal images from or to the device.

The DIY-Thermocam offers a wide range of features, like adding temperature points, changing temperature range limits, displaying hot or cold temperatures only, saving single images or a series of images (video or timelapse) to the integrated storage, changing the color scheme, etc. It can also communicate to the PC over the USB serial protocol, in order to stream thermal images or change settings remotely.

In case you want to extend the existing featureset with your own functionality, that's possible too. The firmware of the DIY-Thermocam is completely open-source and written in C/C++. Just download Visual Studio Code and the PlatformIO extension, and you are ready to go!

Replies rittermax · 2023-05-07
Open on HN
Loading the discussion…

Domain filters

Stories from these domains are hidden from every list. Subdomains match too: blocking substack.com also hides danluu.substack.com. Type a domain, or paste a link to block its site, and press Enter.

New collection

Delete this collection?

About YAVCHN

YAVCHN is a reader for Hacker News and Lobsters, with articles and discussions in separate windows or Classic pages.

Created by Paul Parks and built with PUDL.

YAVCHN source code on GitHub

Privacy policy · Terms of use

Help

Keyboard

j / k
Move down and up the story list. The arrow keys scroll whatever has focus.
Enter
Read the marked story in the article reader.
[ / ]
Read the story above or below in the list, in the same article reader. Back returns to the story you came from.
p
Pin or unpin the marked story, which keeps it in Pinned.
n / N
Move to the next or previous top-level comment in the window in front.
c
Collapse or expand that comment.
f
Hide or show the story list.
Esc
Close a menu or this help.
Access key m
Go to the menu bar. Most browsers take it with Alt on Windows and Linux, and Safari with Control and Option.
?
Show this help.

Windows

Each story opens in a window holding its article above its discussion; drag the bar between them to share the room differently. A window can be moved by its title bar, resized from any edge, snapped to a half or a corner by dragging it there, maximised, or minimised to the bar at the foot of the page. Use Window > New reader window to open an empty reader, or Story > Open in new reader window to open another reader for the current article. Docked readers keep their articles when you select another story from the sidebar. Minimized readers can be restored and reused for their site. A window's Previous and Next buttons read up and down the list in the same window.

A link in a comment or an article to another Hacker News or Lobsters thread opens that thread in a window too. A link to a single HN comment opens the comment above its replies.

While a story's window is in front, the Story and Discussion menus in the menu bar hold its commands: pinning, Previous and Next story, sorting, collapsing every thread, jumping to the first new comment. Each window also remembers where you were in its article and discussion, so a reload, or Back to a story that Next took you past, finds your place again. Closing a window forgets it.

The whole arrangement lives in the address, so a bookmark or a shared link brings it back, and Back undoes the last change. Moving between Hacker News, Lobsters, their lists, Pinned and Find changes only the list, and leaves the windows open.

The list

The pin at the start of a row keeps the story in Pinned, and the cross at its end hides it. Pinned can be narrowed by words in the title, site or author, by source, and to the stories you haven't opened yet, and ordered by when you pinned them, by points or by comments; the filters are part of the address, so a filtered view can be bookmarked. Scroll past the end of the list to load more. Domain filters, in the View menu, hide every story from a site.

Collections are named lists of stories. Story > Add to collection files the story in front into one or more of them, and the Collections feed shows them all or one at a time; the menu that chooses collections also creates, renames, and deletes them. A note is your own text on a story. Choose Add note in a story's toolbar to write one; it saves as you type. Rows with a note carry the note mark, and the Notes feed lists every noted story and searches the text of your notes.

Browsing view

View > Windowed and View > Classic select the browsing view and save your default in this browser. Window view reuses a reader for each feed. Classic view opens stories and applets as pages. Open as a page is a one-off action that does not change your saved default. Use the Windowed selector to return an article to a window. Direct page links always open as pages.

Applets

The Applets menu in the menu bar holds three tools, each a window of its own. Replies to me takes your Hacker News user name and lists the replies to your last thirty comments and stories, checking again every three minutes while it is open, and marking what is new since you last marked them read. Look up a user opens a profile on Hacker News or Lobsters, with their submissions and recent comments, as a commenter's name in any discussion does; the bar at the top of a profile looks up someone else in the same window, and Back returns to the one before. Who is hiring? filters the posts of HN's monthly hiring threads by the words you type.

They read only what the sites publish to everyone, so none of them asks for a login, and your user name stays in this browser anonymously and is included in retained applet state when signed in.

Find

Find takes any link and lists every time it was submitted to Hacker News and Lobsters, so you can read each discussion of it.

About

YAVCHN never sees your Hacker News or Lobsters login. The discussion is fetched from each site's public API; to vote or reply, follow the link above the discussion, or the arrow beside a comment, to the source's own site. Without a YAVCHN account, your data stays in this browser. When signed in, pins, collections, notes, blocked domains, and retained reading state are stored with your account and synchronized across devices. Hidden stories and layout stay in this browser. The privacy policy has the details.

Open source: github.com/paulmooreparks/yavchn. Built with PUDL.